IA SF Riggers Belt

Product Code
IA.UKSF.Riggers.Belt22>IA.UKSF.Riggers.Belt22
Colour
Size
Our price £49.20
Including VAT 20% ( £8.20 )
Quantity
IA SF Riggers Belt

IA SF Riggers BeltSpecial Forces BeltsMTP Riggers BeltsArmy Riggers BeltsTan army belts

SF Riggers Intelligent Armour has re-invented the CQB Riggers Belt!

This belt is manufactured to the same standards using the same military specification webbing and thread as our Combat Holster Belt, yet uses a lightweight AustriAlpin “Cobra Frame” in place of a heavyweight forged metal roll-pin buckle. The SF Riggers belt is fully manufactured by Intelligent Armour in the UK, all component materials are of military specification.

Using the AustriAlpin “Cobra Frame” reduces the overall weight of the belt, and the belt buckle has a tensile strength of 18kN.

Ideal for emergency services, police, military and Special Forces, the SF Riggers Belt was designed by Intelligent Armour as a complement to our Combat Holster Belt. As with the Combat Holster Belt, attention to detail and to the materials used make the SF Riggers Belt one of the very best combat belts on the market today.

Belt width - the width of these belts is 45mm and this will fit most tactical or military trousers.

SF Riggers Belt – Options

Intelligent Armour has added a few options to enable the wearer to customise the combat belt to suit tactical operational requirements and theatres of operation.

Colours – option

The Advance Combat Belt is available in four webbing colours. The colours available are: Black, Tan, Foliage Green and Olive Drab Green. For best colour match with Multicam or UK MTP army issue clothing, we recommend the SF Riggers Belt in either Tan or Foliage Green.

Forged metal Carabiner attachment point

The same Carabiner attachment point as used in the Blackhawk CQB Riggers belt; manufactured to military specification and graded for parachute use.

The AustriAlpin Frame Buckle

Designed and manufactured in Austria, the Frame Buckle is ultra-lightweight and has a tensile strength of 18Kn.

Made from 7075 grade aluminium alloy with stainless steel adjuster bar, tested and certified by highly respected independent /3rd party test houses and exceed Military Specification guidelines.

AustriAlpin Frame Buckles are tested to the following standards:

  • MIL-STD 810F (510.4) Blowing Dust Test Cert
  • MIL-STD 810F (510.4) Blowing Sand Test Cert
  • MIL-STD 810F (509.4) Salt Fog / Corrosion Resistance Test Cert

Webbing and thread

Having looked at both the Blackhawk CQB Riggers Belt and also the 5.11 Operators Belt, we decided that the best possible combination of materials were military specification webbing; type 7 with a tensile strength of 6000lb.

Military grade type 7 webbing is, manufactured to the following standards:

  • MIL-W-4088
  • MIL-W-27265 (R)

The SF Riggers Belt has been sewn with military grade type 69 nylon bonded thread; this thread provides superior strength while resisting rot and mildew.

For more information on our Intelligent Armour product manufacture, see Intelligent Armour Products

Video

Customer feedback

Customer Reviews

  • Author Simon
    I have been using the Rigger belt for everyday duty wear for about three weeks now. It is nicely worn in and I have got to say having tried a few issue alternatives it is without doubt the best tactical belt I have used in 14 years as a Police officer.
    The quality of manufacture is immediately obvious from the outset,it is well finished using top spec materials and put together with thought and attention to detail.
    It is broad enough to be comfortable,narrow enough to fit through the loops of my 5.11s and the buckle does not slip an inch once set.I use it for every day wear and it does not distort whatever i fit to it. I cannot recommend it highly enough.
army clothing
Top